Do you have a question about the VOKERA Easi-Heat Plus 29C and is the answer not in the manual?
Model | Easi-Heat Plus 29C |
---|---|
Category | Boiler |
DHW Output | 29 kW |
Mounting | Wall-mounted |
ERP Rating | A |
Warranty | 5 years |
Flue Options | Horizontal, Vertical |
Type | Combination boiler |
Initial steps and checks before operating the boiler for the first time.
Practical guides for common user tasks and system maintenance.
Step-by-step guide to checking and refilling system water pressure.
Understanding the meaning of the boiler's LED indicators and fault codes.
Troubleshooting common issues and advice on when to seek professional help.
Actions to take if a gas leak is suspected.
Guidance on what information to have ready when calling an engineer.
Instructions for setting the time and switching times on the mechanical clock.
Lists the safety mechanisms integrated into the boiler for safe operation.
Detailed technical specifications and performance data for the boiler models.
General installation requirements and regulations specific to the UK.
General installation requirements and regulations specific to Eire (Ireland).
Comprehensive guide to the physical installation of the boiler.
Instructions for installing horizontal and vertical flue systems.
Specifics for fitting the 60/100mm concentric horizontal flue.
Specifics for fitting the concentric vertical flue system.
Procedures for connecting gas, flow, return, cold water inlet, and hot water outlet.
Steps for connecting the gas supply pipe to the 22mm service valve.
Steps for connecting the flow and return pipes to the 22mm service valves.
Steps for connecting the cold water inlet pipe to the 15mm stopcock.
Steps for connecting the hot water outlet pipe to the 15mm connection.
Instructions for connecting the safety valve and discharge pipe.
Instructions for connecting the boiler to the mains electrical supply.
Detailed procedure for wiring the 230V mains input to the terminal block.
Procedures for commissioning the boiler after installation.
Checks required for the gas supply before commissioning.
Procedure for filling and venting the heating system.
Detailed instructions for flushing the system both cold and hot.
A checklist of essential checks before attempting initial lighting.
Steps for switching on the boiler and initiating the first lighting sequence.
Procedure for checking gas pressure and performing combustion analysis.
Final checks to ensure all connections and systems are secure.
How to demonstrate appliance operation and safety to the user.
Detailed guide for performing routine maintenance and servicing.
Steps and checks involved in a routine annual service.
Guidance on replacing internal components of the boiler.
Procedure for replacing the gas valve, including gas tightness checks.
Procedures for checking, adjusting, and troubleshooting the boiler.
General checks to ensure safe operation after repairs or servicing.
Detailed explanation of the boiler's operating modes and functions.
Description of the boiler's operation during a heating demand.
Description of the boiler's operation when a hot water tap is opened.
Performing a combustion analysis test on the appliance.
Common installation-related faults and their possible causes.
Procedures for performing electrical safety checks.
How to perform an earth continuity test on the appliance.
General procedure for fault finding and troubleshooting.
Diagrams illustrating electrical connections for the boiler and controls.
Procedure for checking CO2 and adjusting the gas valve for LPG.
How to access and use the CO2 function settings for LPG.
Adjusting the gas valve for maximum LPG output.
Adjusting the gas valve for minimum LPG output.
Detailed procedure for checking and ensuring correct combustion ratios.
Performing CO and combustion ratio checks at maximum boiler output.
Performing CO and combustion ratio checks at minimum boiler output.
Information regarding the Benchmark scheme for boiler installation and servicing.
The official checklist for commissioning gas boiler systems.
Logbook for recording annual servicing details and engineer information.