5
NOTE, when the ADVANCE OFF function is enabled, the hea-
ting will remain OFF until the next scheduled ON period.
1.6 MODE OF OPERATION
To change the mode of operation (AUTO to MAN) momenta-
rily press the
button; the display will show the following:
• AUTO OFF Heating is in an OFF period according to the
programmed heating pattern
• AUTO ON Heating is in an ON period according to the
programmed heating pattern
• MAN OFF Heating is being controlled manually and is
switched constantly OFF
• MAN ON Heating is being controlled manually and is
switched constantly ON.
1.7 RESET HEATING PROGRAM TO DEFAULT VA-
LUES
The heating pattern can be reset to the default values (see
g.1) by pressing and holding both
buttons simulta-
neously for 3-seconds.
NOTE
This cancels any previously input, user dened settings
To Next Page