Volare Marcopolo - Page 24

24
2.8 Traction (differential gear – oil and antifriction replacement);
2.9 Brake System (compressor, brake shoe lining and/or pads, air
reservoir and dry air filter);
2.10 Suspension (springs and stabilizing rods);
2.11 Steering System (hydraulic oil reservoir, steering rod and
toe-in);
2.12 Front axle (main rod and front wheel bearing);
2.13 Clutch Coupling (hydraulic clutch reservoir and clutch
liquid);
2.14 Wheels (calibration and wheel changing);
3. Orientations on the Feeding Levels
3.1 Water from the washer reservoir, expansion chamber and mixture;
3.2 Liquid from the clutch and brake reservoir;
3.3 Oil from the engine crankcase, gearbox, differential gear and hydraulic
system;
3.4 Oil from the fuel tank;
NOTE: The plant recommends to use mixture of water and
lubricants.
4. Orientations concerning the Control Panel
4.1 Panel indicators;
4.2 Panel Controls and Interrupters;
4.3 Starting Switch and Master Switch;
4.4 Sound System – selector switch functions;
4.5 Electric Switchboard (position and safety precautions);
4.6 Multifunctional Switch and Speed Selection Lever;
4.7 Engine Hood;
4.8 Route Plate;
4.9 Parking Brake and Controls;
4.10 Diagnosis Lamp and Orientation Chart;