– Release from catches from the middle
– Pull out of side insert to centre.
6 - Centre air intake grille
❑ Different versions, allocation ⇒ Electronic parts catalogue “ETKA”
❑ Clipped in front bumper cover
❑ Can only be removed with front bumper cover removed and the side air intake grilles removed
7 - Bolt
❑ Left and right
❑ Specified torque: 2 Nm
❑ For securing the side air intake grilles to the bumper cover
8 - Trim
❑ For side air intake grille
❑ Left and right
❑ Not fitted in all model versions; assignment ⇒ Parts catalogue “ETKA”
❑ Clipped into side air intake
❑ Can be removed only with side air intake removed.
9 - Top trim strip
❑ For centre air intake grille
❑ Not fitted in all model versions; assignment ⇒ Parts catalogue “ETKA”
❑ Clipped into middle air intake grille
❑ Can be removed only with middle air intake removed.
10 - Centre trim strip
❑ For side air intake grille
❑ Left and right
❑ Not fitted in all model versions; assignment ⇒ Parts catalogue “ETKA”
❑ Clipped into side air intake
❑ Can be removed only with side air intake removed.
11 - Centre trim strip
❑ For centre air intake grille
❑ Not fitted in all model versions; assignment ⇒ Parts catalogue “ETKA”
❑ Clipped into middle air intake grille
❑ Can be removed only with middle air intake removed.
12 - Trim strip
❑ For trim
❑ Left and right
❑ Not fitted in all model versions; assignment ⇒ Parts catalogue “ETKA”
❑ Clipped into side air intake trim
❑ Can be removed only with side air intake trim removed.
13 - Trim strip
❑ For side air intake grille
❑ Left and right
❑ Clipped into side air intake
❑ Can be removed only with side air intake removed.
14 - Lower trim strip
❑ For centre air intake grille
❑ Clipped into middle air intake grille
❑ Can be removed only with middle air intake removed.
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
1. Front bumper cover 283
To Next Page
Loading...
Need help?
General
