Volkswagen Passat 2011 User Manual

2.8.2 Installing
Hinge -1- installation is carried out in reverse order of removal.
– Specified torque for bolts -3- for hinge -1-: 22 Nm.
– Install rear lid ⇒ page 39 .
Note
When closing the rear lid, the edge of the hinge seal must not be drawn in by the hinge cylinder. The hinge
must be set so that the hinge cylinder does not rub up against the edge of the seal.
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
2. Rear lid (saloon) 45

Volkswagen Passat 2011 Specifications

General

Brand	Volkswagen
Model	Passat 2011
Category	Automobile
Language	English