Volkswagen Transporter 2020 User Manual

1 - Upper part of outer casing
❑ Made of plastic
❑ Removing and installing
⇒ page 44
2 - Flame monitor - G64- and
overheating sensor - G189-
(combination sensor)
❑ Overheating and flame
monitor
❑ Supplied with installa‐
tion tool
❑ Removing and installing
⇒ page 46
3 - Glow plug for heater - Q9-
❑ Supplied with special
tool
❑ Removing and installing
⇒ page 45
❑ 6 Nm
4 - Front cover
❑ Made of plastic
❑ Removing and installing
⇒ page 44
5 - Glow pin lining
❑ Supplied with installa‐
tion tool
❑ Vehicle-specific
6 - Heat exchanger
❑ Removing and installing
⇒ page 48
7 - Combustion chamber
❑ Removing and installing
⇒ page 45
8 - Lower part of outer casing
❑ Made of plastic
❑ Removing and installing ⇒ page 44
9 - Flange seal
❑ Renew if damaged
10 - Combustion air blower - V6- (combination blower)
❑ Combustion and heating air blower in one
❑ Removing and installing ⇒ page 47
11 - Metering pump 2 - V386-
❑ Removing and installing ⇒ page 51
12 - Auxiliary air heater control unit - J604-
❑ Removing and installing ⇒ page 42
Transporter 2020 ➤
Auxiliary heater - Edition 04.2020
7. Auxiliary air heater 35

Volkswagen Transporter 2020 Specifications

General

Brand	Volkswagen
Model	Transporter 2020
Category	Automobile
Language	English