6
Safety instructions
Please read all safety instructions before using the device to ensure safe
and proper use.
• Do not push, bend or throw the device.
• Avoid the USB port coming into contact with conductive materials
such as metals or liquids.
• Avoid using the phone in an industrial environment or near metal
shavings.
• If any part of the device, e.g. the display or the housing, is damaged,
smokes or emits a burning odor, stop using the device immediately.
Do not use the device again until it has been repaired at a Volla
authorized service center.
• If the back cover of the appliance is dented, turn o the appliance
immediately and go to the nearest Volla authorized service center.
OBSERVE THE FOLLOWING WARNINGS TO AVOID PERSONAL
INJURY OR DAMAGE TO THE APPLIANCE
• Keep the device away from unsupervised children and animals.
• Do not use the camera flash near the eyes of people or animals.
• The device can be used in locations with an ambient temperature of
0° C to 35° C. You can store the device at an ambient temperature
of -20° C to 50° C. If you use or store the device outside the
recommended temperature ranges, the device may be damaged or
the battery life may be shortened.
• Do not use the device in a hot environment or near fire.
• Observe all safety instructions and regulations regarding the use of
mobile devices when driving a vehicle.
• Switch o your smartphone in potentially explosive atmospheres and
observe all warnings. Potentially explosive areas are also those places
where it is normally recommended to switch o vehicle engines. In
such places, flying sparks can be the cause of explosions or fires
resulting in personal injury and possibly danger to life. Such areas
include: Petrol stations, chemical factories, transportation or storage
facilities of hazardous chemicals, areas below ship decks, areas where
the air contains chemical substances or fine particles (e.g. dust or
metal powder particles).
• Short-circuiting, disassembling or modifying your smartphone is
prohibited - there is a risk of personal injury, electric shock, fire or
damage to the charger.
• It is recommended not to use fixed graphics on any part or the
entire display for an extended period of time. Otherwise, afterimages
(screen burn-in) or ghosting may occur.
MAINTAINING WATER AND DUST RESISTANCE
• The device may be damaged if water or dust enters the device. Follow
these tips carefully to prevent damage to the device and to maintain
the water and dust resistance of the device.
• To ensure the proper functioning and longevity of the device, it is
important that it is not exposed to water with great force.
• If the device has come into contact with fresh water, dry it thoroughly
with a clean and soft cloth. If the device has come into contact with
other liquids such as swimming pool water, salt water, soapy water,
oil, perfume, sun cream, hand cleaner or chemical products such as
cosmetics, rinse it with fresh water and dry it thoroughly with a clean,
soft cloth. If you do not follow these instructions, the performance
To Next Page
Loading...
