To Next PageTo Next Page
Need help?Do you have a question about the VOLTCRAFT LSG-4 and is the answer not in the manual?
General| Brand | VOLTCRAFT |
|---|---|
| Model | LSG-4 |
| Category | Security Sensors |
| Language | English |
General safety advice for device handling, keeping away from children, and environmental protection.
Advice on observing safety and operating instructions for other connected devices.
Instructions for proper handling, insertion, and disposal of batteries to prevent hazards.
Steps to power on the multimeter using the rotary switch and turn it off.
Procedures for measuring DC and AC voltages using the multimeter, including connection.
Steps to measure resistance, ensuring components are disconnected from voltage.
How to perform a diode test, including connection and interpreting results.
Procedure for checking continuity, including connection and audible beep indication.
How to freeze the displayed measuring value for easier reading or recording.
Function to keep and display the maximum value during continuous voltage measurements.
Automatic power-off feature after 15 minutes of inactivity to save battery.
How to activate the signal transmitter and receiver for cable detection.
Performing continuity tests on cables using banana clips, with optical indication.
Testing telephone line status, polarity, and ring tone using banana clips or modular plugs.
Determining cable paths using acoustic signals, tracing with a receiver, and identifying lines.
General maintenance advice, including annual calibration and checking for damage.
Instructions for safely cleaning the device and measuring lines with a damp cloth.
