30
OPERATING ELEMENTS
See fold-out page
1. SELECT button
2. Non-contact voltage sensor
3. Torch light
4. LC display
5. Rotary switch
6. Battery compartment
7. Stand clamp
8. mA µA Hz%VΩ socket
9. COM socket (reference potential)
10. 10A max socket
11. HOLD / BACK LIGHT button
12. Torch button
DISPLAY INDICATIONS AND SYMBOLS
Battery replacement icon; please replace the battery as soon as possible
Symbol for the diode test
Lightning icon for voltage measuring
Symbol for the acoustic continuity tester
~ AC Alternating current
DC Direct current
Symbol for active hold function
Ω Ohm (unit of electric resistance)
kΩ Kiloohm (exp.3)
MΩ Megaohm (exp.6)
OL Overload, the measuring range was exceeded
V Volt (unit of electric potential)
A Ampere (unit of electric current strength)
mA Milli ampere (exp.-3)
µA Microampere (exp.-6)
Hz Hertz (unit of frequency)
kHz Kilohertz (exp.3)
MHz Megahertz (exp.6)
% Display of the pulse/break ratio (duty cycle)
Delta symbol for active relative measuring function
Auto Range Automatic measuring range selection
Capacitance
nF Nano farad (exp. -9) (unit of capacity)
µF Micro farad (exp. -6) (unit of capacity)
To Next Page
Loading...
