J
Joseph YoungAug 4, 2025
What to do if my VOLTCRAFT VC135 shows no measuring change?
- SSusan CastroAug 5, 2025
If your VOLTCRAFT Multimeter isn't showing any measurement changes, consider these possibilities: 1. The HOLD function might be activated, indicated by an “H” on the display. Press the “HOLD” button again to deactivate it. 2. The wrong measuring function (AC/DC) could be active. Check the display and switch the function if necessary. 3. You may be using the incorrect measuring sockets. Ensure they are correctly connected. 4. The fuse might be defective in the A/mA/?A range. Replace the fuse as described in the chapter ”Changing the fuse”.