VOLTCRAFT VC270 User Manual

°
Digital-Multimeter

BEDIENUNGSANLEITUNG
Seite 4 - 27
Digital Multimeter
 OPERATING INSTRUCTIONS Page 28 - 51
Multimètre numérique
 NOTICE D’EMPLOI Page 52 - 75
Digitale multimeter
 GEBRUIKSAANWIJZING Pagina 76 - 99
Best.-Nr. / Item-No. /
N° de commande / Bestnr.:
124501 VC250
124502 VC270
124503 VC290
Version 06/14

VOLTCRAFT VC270 Specifications

General

Type	Digital Multimeter
Frequency	10 Hz - 10 MHz
Diode Test	Yes
Continuity Test	Yes
Power supply	9 V battery
Category	CAT III 600 V
Display	LCD
Basic accuracy	0.5%
Temperature	-40 to +1000 °C

Summary

Introduction

Intended Use

Controls

Safety Instructions

Product Description

Dial Switch

Explains dial switch for function and range selection on VC270/VC290 and manual settings on VC250.

Display and Symbols

Display Elements

Overview of the display elements for the DMM models.

Display Indications and Symbols

Explanation of various symbols and indications shown on the DMM display.

Measuring Operations

Basic Operation and Voltage Measurement

Details on powering on, and measuring DC/AC voltages.

Current, Resistance, and Frequency Measurement

Procedures for measuring current, resistance, and frequency.

Diode, Continuity, Capacity, and Battery Tests

Guides for diode tests, continuity checks, capacity, and battery testing.

Advanced Functions

Explains REL, HOLD, Low Impedance, and Auto-Power-Off features.

Cleaning and Maintenance

General Cleaning and Opening Procedures

Information on general cleaning, opening the device, and maintenance.

Battery, Fuse, and Charging Management

Procedures for replacing fuses/batteries and charging the VC290.

Product Disposal

Guidelines for the proper disposal of the product and batteries.

Troubleshooting

Technical Data