To Next PageTo Next Page
Need help?Do you have a question about the VOLTCRAFT VC2030A and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Diode Test | Yes |
| Continuity Test | Yes |
| Power supply | 9V Battery |
| Category | CAT III 600V |
| Measuring type | True RMS |
| Basic accuracy | 0.5 % |
| DC Current Range | 0.1 µA - 10 A |
| AC Current Range | 0.1 µA - 10 A |
| Resistance Range | 0.1 Ohm - 40 MOhm |
| Capacitance Range | 1 pF - 100 µF |
| Frequency Range | 10Hz - 10MHz |
| Temperature Range | -20°C - 1000°C |
Provides essential safety guidelines and warranty information for product usage, emphasizing adherence to operating instructions.
Details precautions for handling and storing batteries, warning against misuse, short-circuiting, and improper disposal.
Explains the procedure for zeroing the multimeter before measurements to ensure accuracy, involving an adjustment screw.
Details how to test the multimeter's internal battery using specific settings and connections, indicating when replacement is needed.
Guides on performing DC and AC voltage measurements, including connection methods, range selection, and safety precautions.
Instructions for measuring DC and AC current in mA, covering connection, range selection, and safety, with a table for calculations.
Explains how to measure resistance, emphasizing disconnection from voltage, proper connections, and using a table for multiplication factors.
Details the procedure for continuity testing, including connection, settings, and the audible signal indicating low resistance.
Describes how to test battery capacity by selecting the correct voltage setting and connecting the probes to the battery poles.
States that the multimeter requires no servicing except battery replacement and recommends annual calibration for accuracy.
Provides instructions on cleaning the multimeter and leads using a soft, damp cloth, warning against aggressive cleaning agents.
Details the process for replacing fuses in the multimeter, including opening the compartment, removing batteries, and replacing the fuse.
Instructs users to dispose of the product according to statutory provisions at the end of its service life.
Explains the legal requirement to return used batteries and warns against household waste disposal, indicating hazardous metal content.
