To Next PageTo Next PageWhat to do if my VOLTCRAFT Multimeter measuring value does not change?
If the measuring value on your VOLTCRAFT Multimeter isn't changing, the HOLD function might be active. Try pressing the HOLD button to deactivate it.
Why is current measurement not possible on my VOLTCRAFT Multimeter?
If you cannot measure current with your VOLTCRAFT Multimeter, the fuse for the mAµA or the 10A measuring range might be defective. Check the fuse and replace it if necessary.
General| Type | Digital Multimeter |
|---|---|
| Basic accuracy | 0.5% |
| Max DC Voltage | 1000 V |
| Max AC Voltage | 750 V |
| Max DC Current | 10 A |
| Measurement Category | CAT III 600 V |
| Diode Test | Yes |
| Continuity Test | Yes |
| Display | LCD |
| DC Current Range | 10A |
| Frequency Range | 10Hz - 10MHz |
| Battery | 9V |
| Weight | 400 g |
Lists item numbers for digital multimeters.
Indicates that this section provides operating instructions.
Describes the intended purpose and operating conditions of the product.
Explains safety symbols and provides general safety advice.
Details CE marking, insulation classes, and voltage categories.
Describes the multimeter's display, keypad, rotary switch, and sockets.
Lists the accessories and components included with the multimeter.
Explains the functions assigned to each position of the rotary switch.
Details the functions of each button and the F1-F4 function keys.
Guides on setting the auto power-off timer for battery saving.
Explains how to adjust the screen's background illumination and contrast.
Shows the main display elements during SCOPE operation.
Describes the automatic setting for optimal signal display.
Details how to manually adjust the vertical deflection scale.
Details how to manually adjust the time scale for signal display.
Explains trigger modes and how to set the trigger threshold.
Warns about input limits, damaged leads, and electrical shock risks.
Step-by-step guide for measuring direct current voltages.
Explains function buttons for AC/DC voltage measurements.
Procedure for measuring resistance and performing continuity tests.
Advises on ensuring clean measurement points for accuracy.
Details function buttons for resistance, diode, and continuity tests.
Step-by-step guide for measuring signal frequency.
Explains how to perform and display duty cycle measurements.
Step-by-step guide for measuring capacitance of capacitors.
Warns about discharging capacitors and potential hazards.
Introduces current measurement sections and overload protection.
Procedure for measuring direct and alternating currents up to 400 mA.
Procedure for measuring direct and alternating currents up to 10 A.
Explains how to freeze the currently displayed measurement value.
Guides on saving and recalling up to 10 measuring curves in SCOPE mode.
Describes the optical interface and its connection to a PC.
Details how to operate the device using an optional power adapter.
Mentions annual calibration and periodic technical safety checks.
Provides safety instructions and guidelines for cleaning the device.
Step-by-step guide for safely replacing the internal fuses.
Lists the specific fuse types and ratings permitted for replacement.
Instructions for inserting new batteries or changing existing ones.
Advises removing batteries for long periods or when using power pack.
Explains legal requirements for proper disposal of used batteries.
Provides guidelines for disposing of the electronic device as waste.
Lists common malfunctions and their potential causes and fixes.
Provides key technical data such as display, resistance, and voltage.
Details accuracy, resolution, and overload protection for voltage measurements.
Details accuracy, resolution, and overload protection for current measurements.
Details accuracy, resolution, and overload protection for resistance measurements.
Details accuracy, resolution, and overload protection for frequency measurements.
Details accuracy, resolution, and overload protection for capacity measurements.
Details bandwidth, sampling rates, and deflection for SCOPE mode.
