Need help?Do you have a question about the Volvo Penta 5.7 GiI-E and is the answer not in the manual?
General| Brand | Volvo Penta |
|---|---|
| Model | 5.7 GiI-E |
| Category | Outboard Motor |
| Language | English |
Explains engine power output and influencing environmental factors.
Details how boat weight and load impact performance and speed.
Outlines the owner's duties for engine operation, maintenance, and safety.
Provides a checklist for preparing a safe and pleasant boat trip.
Offers guidance for safely operating high-speed boats and handling situations.
Details requirements for engines certified for emission regulations.
Lists engine and transmission identification plates for service and parts.
Explains the owner's card for proof of ownership and warranty validation.
Describes the 24-hour breakdown assistance service for Volvo Penta owners.
Advises on performing self-maintenance and when to consult a dealer.
Emphasizes using genuine Volvo Penta parts and accessories.
Guides on locating and utilizing authorized Volvo Penta dealers for service.
Details the Hurth transmissions applicable to specific Volvo Penta engines.
Describes the Borg Warner BW72C transmission and its applicable engines.
Explains the tachometer function and how to read engine RPM and operating hours.
Details the engine coolant temperature gauge and normal operating ranges.
Describes the oil pressure gauge and normal operating oil pressure readings.
Describes the ignition switch positions for starting and operating the engine.
Explains the function and proper use of the emergency stop switch for safety.
Covers how to control shifting and engine speed using the control lever.
Explains how to adjust the friction brake for throttle control.
Outlines essential checks and preparations before starting the engine.
Provides step-by-step instructions for starting the engine safely.
Explains how to clear a flooded engine using throttle control.
Advises on regularly checking engine instruments for normal readings.
Explains normal coolant temperature readings and actions for high temperatures.
Guides on proper shifting procedures and speed control for safe operation.
Recommends optimal cruising speeds and explains WOT ranges.
Details the correct procedure for shutting down the engine after operation.
Provides instructions for engines left in the water for extended periods.
Gives guidance for engines stored on land, including anode maintenance.
Explains the self-adjusting serpentine belt and checks for wear.
Details how to check and maintain the engine oil level.
Guides on replacing the engine oil and oil filter for engine longevity.
Describes the engine's cooling system and operational considerations.
Provides instructions for draining the raw water cooling system to prevent freezing.
Details the procedure for inspecting and replacing the raw water pump impeller.
Guides on the procedure for replacing the fuel filter.
Explains the 12-volt electrical system, alternator, and fuse box.
Provides instructions for maintaining the battery, including charging and cleaning.
Details the importance and procedure for engine alignment by a dealer.
Procedures to protect the engine and transmission during storage.
Steps and checks required before launching the boat.
Instructions for flushing the engine with fresh water.
Provides detailed specifications for the engine, including bore, stroke, and volume.
Lists specifications related to the fuel injection type and filter part number.
Details oil capacity, grade, viscosity, and filter part number.
Lists system voltage, battery capacity, and generator specifications.
Specifies the required octane rating for US and international markets.
To Next Page
