Do you have a question about the Volvo Penta D16 MH and is the answer not in the manual?
Engine Model | D16 MH |
---|---|
Compression Ratio | 17.5:1 |
Aspiration | Turbocharged and Intercooled |
Fuel System | Common Rail |
Fuel Type | Diesel |
Displacement | 16.1 liters |
Bore | 144 mm |
Stroke | 165 mm |
Cooling System | Freshwater Cooling |
Emissions Compliance | IMO Tier II |
Engine Type | In-line 6-cylinder diesel engine |
Covers safety regulations for operation, maintenance, and general directions.
Covers environmental care, fuel, oil, service, parts, certified engines, and warranty.
Details the D16 engine features, components, and technical overview.
Explains ignition lock, start/stop panel, and EVC control panel functions.
Details warning lamps for oil pressure, water in fuel, battery, and coolant.
Guides through EVC tachometer menus for speed, trip, gauges, and settings.
Explains the EVC display functions, modes, and settings.
Describes operation, disengaging shift function, and friction brake adjustment.
Covers engine starting procedures, general info, and warming-up guidelines.
Details general operation, applying load, running-in, manoeuvring, and running.
Explains cruising speed, synchronizing, helm stations, and steering.
Covers normal stopping procedures and emergency stop functions.
Details checks after stopping, anti-freezing measures, and storage preparation.
Covers maintenance intervals, daily/maintenance records, fluids, and warranty inspection.
Details drive belts, oil level, oil change, and filter replacement.
Covers fuel system venting, filter changes, air filter, and cooling system maintenance.
Covers raw water system, zinc anodes, impeller, electrical system, and batteries.
Details reverse gear oil, seals, and engine inhibiting for storage.
Covers emergency starting, shutdown override, emergency shifting, diagnostic function, malfunction messages.
Covers fault-tracing, symptoms, fault lists, fault registers, and fault code registers.
Provides technical data for the D16 MH engine, including dimensions and temperatures.
Details specifications for reverse gear, fuel, oil, and coolant systems.
Covers engine identification numbers and sea trial data recording.