Need help?Do you have a question about the Volvo Penta TAD940GE and is the answer not in the manual?
Details the scope and purpose of the workshop manual for Volvo Penta engines.
Information on using Volvo Penta Original Spares for electrical and fuel systems.
Requirements for maintaining certified engine compliance with environmental regulations.
General technical specifications for various Volvo Penta engine models.
Detailed specifications for engine block, cylinder head, liners, pistons, and rings.
Specifications for valves, valve seats, guides, and springs.
Specifications for crankshaft, main bearings, and big end bearings.
Standard tightening torque values for various screw sizes.
Torque specifications for engine block, main bearing caps, and big end caps.
Details the scope and purpose of the workshop manual for Volvo Penta engines.
Information on using Volvo Penta Original Spares for electrical and fuel systems.
Requirements for maintaining certified engine compliance with environmental regulations.
General technical specifications for various Volvo Penta engine models.
Detailed specifications for engine block, cylinder head, liners, pistons, and rings.
Specifications for valves, valve seats, guides, and springs.
Specifications for crankshaft, main bearings, and big end bearings.
Standard tightening torque values for various screw sizes.
Torque specifications for engine block, main bearing caps, and big end caps.
General| Engine Model | TAD940GE |
|---|---|
| Engine Type | Diesel |
| Fuel System | Common Rail |
| Cooling System | Water-cooled |
| Emissions Standard | EU Stage V |
| Number of Cylinders | 6 |
| Displacement | 9.4 L |
| Frequency (Hz) | 50 Hz |
| Engine Speed (RPM) | 1800 |
| Aspiration | Turbocharged |
To Next Page