Volvo Penta TAD952VE User Manual

Technical data
19
Group 20
Lubrication oil systems
TAD940-941GE, TAD940-943VE
1)
If sulfur content is > 1.0 % by weight, use oil with TBN > 15.
2)
Lubrication oil must comply with both requirements. Note. API: CG-4 or CH-4 can be approved in markets outside Europe (instead of
ACEA A3).
NOTE! Mineral based oil, either fully or semi-synthetic, can be used on condition that it complies with the quality
requirements above.
NOTE! Oil filter must be changed with every oil change.
VDS = Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d’Automobiles
API = American Petroleum Institute
TBN = Total Base Number
TAD950-952VE
Sulfur content in fuel, by weight
< 0.5 % 0.5 – 1.0 % > 1.0 %
1)
Oil grade Oil change interval: Reached first in operation
VDS-3 600 hours / 12 month 300 hours / 12 month 150 hours / 12 month
VDS-2 and ACEA E7
2)
VDS-2 and ACEA E5
2)
VDS-2 and Global DHD-1
2)
VDS-2 and API CI-4
2)
VDS-2 and API CH-4
2)
VDS and ACEA E3
2)
400 hours / 12 month 200 hours / 12 month 100 hours / 12 month
ACEA: E7, E5, E4 200 hours / 12 month 100 hours / 12 month 50 hours / 12 month
API: CI-4, CH-4, CG-4
Sulfur content in fuel, by weight
< 0.3 % 0.3 – 0.5 % > 0.5 %
1)
Oil grade Oil change interval: Reached first in operation
VDS-3 500 hours / 12 month 250 hours / 12 month 125 hours / 12 month
VDS-2 and ACEA E7
2)
250 hours / 12 month 125 hours / 12 month 75 hours / 12 month
VDS-2 and ACEA E5
2)
VDS-2 and Global DHD-1
2)
VDS-2 and API CI-4
2)
VDS-2 and API CH-4
2)
VDS and ACEA E3
2)
125 hours / 12 month 75 hours / 12 month 50 hours / 12 month
ACEA: E7, E5, E4
API: CI-4, CH-4, CG-4

Volvo Penta TAD952VE Specifications

General

Brand	Volvo Penta
Model	TAD952VE
Category	Engine
Language	English