54
Maintenance: Fuel system
4. Drain off water and contaminants through the
drain plug (4).
5. Fit a new filter insert and fill the container with
clean fuel.
IMPORTANT! Cleanliness! No contaminants
must be allowed in the fuel system.
6. Change the gasket on the cover and the O-ring on
the T-bolt. Moisten the gasket and O-ring with fuel
before assembling.
7. Fit the cover and tighten it by hand.
8. Wipe off any fuel from the heat shield.
9. Dual filter: Change the other filter insert in the
same way.
10.Open the fuel cocks and put the knob (1) in posi-
tion for normal running. Make sure there are no
leaks.
1
4
3
2
4
3
2
To Next Page
Loading...
