EasyManua.ls Logo

Volvo Penta TAMD122P User Manual

Volvo Penta TAMD122P
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S MANUAL
TAMD103A
TAMD122A, TAMD122P

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta TAMD122P and is the answer not in the manual?

Volvo Penta TAMD122P Specifications

General IconGeneral
Number of Cylinders6
Fuel SystemDirect Injection
Cooling SystemFreshwater Cooled
Compression Ratio17:1
Max Torque RPM1400 rpm
Engine TypeDiesel
TypeDiesel
Stroke150 mm

Summary

Safety Information

Safety Directions for Maintenance and Service

Details critical safety precautions and procedures to follow when performing maintenance or service on the engine.

Instrumentation

Warning Displays

Explains the meaning of warning lamps and acoustic alarms for engine status and potential issues.

Controls

Starting the Engine

Measures Before Start

Lists essential checks and preparations required before starting the engine.

Starting Procedure

Provides step-by-step instructions for safely starting the engine using various methods.

Operation

Check the Instruments

Guides on checking engine instruments and warning displays during operation for optimal performance.

Alarms and Fault Indication

Explains how to interpret and respond to engine alarms and fault indications for immediate action.

Stopping the Engine

Stop

Provides the standard procedure for shutting down the engine correctly.

Emergency Stop

Explains the manual method to stop the engine in case of a malfunction with the normal stop controls.

Maintenance Schedule

Maintenance

Engine, General

Covers general inspections and maintenance tasks for the engine and engine room.

Lubricating System

Provides details on oil change intervals, grades, viscosity, and checking/filling engine oil.

Freshwater System

Explains the internal cooling system, coolant types, quality requirements, and procedures for filling and draining.

Seawater System

Covers the external cooling system, including draining, zinc anode checks, impeller, filters, and heat exchanger maintenance.

Fuel System

Details fuel specifications, delivery pipes, bleeding procedures, and fuel filter changes.

Electrical System

Covers the 24V electrical system, main switch, connections, fuses, batteries, and electrical installations.

Reverse Gear

Oil Level. Check and Filling

Describes how to check and fill the oil level in the reverse gear, including recommended procedures.

Oil. Change

Provides instructions for draining and filling the reverse gear oil, including the use of oil bilge pumps.

Inhibiting

Troubleshooting

Symptom and Possible Cause

Lists common engine symptoms and their potential causes to aid in diagnosing issues.

Start Using Auxiliary Batteries

Explains the safe procedure for starting the engine using auxiliary batteries.

Technical Data

Related product manuals