11
Special tools
9996852-1 Connection washer for pressure testing
the cylinder block
9996855-4 Mandrel for installing the front crankshaft
seal
9996861-2 Tool for installing the copper sleeve and
steel ring, 7(x) series. Used together with
9996402 and 9996420
9996867-9 Underlay for extracting the copper sleeve
and steel ring. Used together with
9996419 and 9996657
9996878-6 Jig for cylinder block
9998009-6 Adapter for measuring compression pres-
sure
9998070-8 Tool for installing the copper sleeve and
steel ring, 6(x) series. Used together with
9996406 and 9996421
9998079-9 Tool for lifting camshaft in and out
9998114-4 Seal plate (2 required) for pressure test-
ing the cylinder block, 6(x) series
9998115-1 Seal plate (2 required) for pressure test-
ing the cylinder block, 7(x) series
9999508-6 Cutter for renovating liner seat, 7(x)
series
1)
9999553-2 As above, but for 6(x) series
2)
1)
9999518 Cutter for cutting tool 9999508
2)
9999554 Cutter for cutting tool 9999553
9998114
999811599980799998070
999800999968679996861
99968559996852
9996878
9999508
9999553
To Next Page
Loading...