Need help?Do you have a question about the Volvo Penta TAMD70D and is the answer not in the manual?
General| Fuel Type | Diesel |
|---|---|
| Turbocharger | Yes |
| Aspiration | Turbocharged |
| Fuel System | Direct injection |
| Cylinders | 6 |
| Stroke | 120 mm |
| Engine Type | Diesel |
| Cooling System | Freshwater-cooled |
| Weight | 650 kg |
Key safety regulations for operating a boat and general advice for safe boating practices.
Guidance on safe practices for engine maintenance, service, and handling of potential hazards.
Details on the nomenclature and identification codes for different engine models.
Information on where to find the serial and type number plates on the engine.
Overview of the engine's construction, cooling, lubrication, and fuel systems.
Description of the various gauges and indicators on the instrument panels.
Explanation of the function of single/twin lever controls and disengageable clutches.
Essential checks for coolant, oil levels, and fuel before starting the engine.
Step-by-step instructions for starting the engine, including pre-heating procedures.
Checks to perform immediately after the engine starts, including warning lamps and gauges.
Recommended engine speeds for cruising and general operation.
Guidelines for breaking in a new or reconditioned engine for optimal performance.
Regular checks of instruments and systems while the engine is running.
Procedure for engaging the mechanical safety clutch for limited operation in emergencies.
Steps to take to protect the cooling system from frost damage.
Information on the necessity and function of a propeller shaft brake.
Table detailing cooling system capacities and glycol requirements for frost protection.
Specifications for engine oil quality, viscosity, and standards.
Information on lubricating oil for reverse gear and hydraulic systems.
Quality demands and standards for diesel fuel oil used in the engine.
List of daily checks for engine oil, reverse gear, coolant, and batteries.
Maintenance tasks to be performed every 50 operating hours.
Maintenance tasks to be performed every 100 operating hours.
Maintenance tasks to be performed every 200 operating hours.
Maintenance tasks to be performed every 600 operating hours.
Maintenance tasks to be performed every 1200 operating hours.
Maintenance tasks to be performed every 2400 hours or as needed.
Procedure for checking the engine oil level using the dipstick.
Procedure for checking the oil level in the reverse gear.
Procedure for checking the oil level in the reduction gear.
Detailed steps for changing the engine oil on specific models.
Instructions for checking and draining water from fuel filters.
Steps for cleaning and replacing fuel filter elements.
Important precautions to follow when changing oil in the SCG 350 HDMK3 reverse gear.
Information on cylinder head gaskets and proper tightening procedures for bolts.
Detailed technical specifications for engine type, bore, stroke, displacement, and speeds.
Technical data for cooling system capacity and thermostat opening temperatures.
Specifications for hydraulic system oil quality, viscosity, and capacity.
Technical data for the fuel system, including injection pump and feed pump specifications.
Technical data for the electrical system, including voltage, alternator, and battery specifications.
Graphs and data for turbo-compressor charging pressure at different loads and temperatures.
Technical data for Twin Disc and SCG reverse gears, including ratios and oil specifications.
Technical data for Twin Disc and Borg Warner/Rockford clutches and reduction gears.
A general block diagram illustrating the electrical system connections.
Detailed wiring diagram for TAMD60A and TAMD60B engines.
Detailed wiring diagram for TAMD70C, TAMD70D, AQD70C, AQD70D engines.
Wiring diagram for the basic instrument panel and its components.
Wiring diagram for panels with supplementary instruments like alarms.
Wiring diagram for the panel containing fuel gauge and rudder indicator.
Wiring diagram for the Flying Bridge instrument panel and its components.
To Next Page