Need help?Do you have a question about the Volvo Penta TAMD74A-A and is the answer not in the manual?
General| Brand | Volvo Penta |
|---|---|
| Model | TAMD74A-A |
| Category | Engine |
| Language | English |
Essential safety rules and recommendations for operating a boat safely.
Explains the risks and prevention of carbon monoxide poisoning on boats.
Crucial safety guidelines for performing engine maintenance and service.
Safety precautions for hot surfaces, fluids, chemicals, cooling, fuel, and electrical systems.
Volvo Penta's commitment to environmental protection and user responsibilities.
Procedures and guidelines for the initial running-in period of the engine.
Recommendations for fuel and oil grades and their importance for engine life.
Importance of using genuine parts and authorized service for reliability.
Special requirements for maintenance and service of emission-certified engines.
Information on engine warranty coverage, conditions, and owner responsibilities.
Location and importance of engine and transmission identification plates for parts/service.
Description of the control unit, buttons, and their basic functions.
How to adjust screen brightness/contrast and view information.
Explanation of Autostop, Lamptest, Log, and Changing View operations.
Describes the different screen views: Instrument, Alarm List, Information, Event Log.
How to interpret alarm lists and information displays on the LCD screen.
Procedure for setting the system's time and date via the control panel.
Operation and disengaging function of the single lever engine control.
Operation and friction brake adjustment for the dual lever engine control.
Essential measures to take before attempting to start the engine.
Step-by-step guide for starting the engine, including gear disengagement.
Procedures for warming up the engine and checking readings post-start.
How to check engine parameters like oil pressure, coolant, and exhaust temperature.
Understanding the meaning of control panel LEDs and fault indications.
Guidelines for efficient cruising and safe boat handling.
Procedures for pulling away, forward-reverse changes, and forced propeller rotation.
Operation of trolling valves and bilge/flush pumps.
Step-by-step procedure for stopping the engine correctly.
How to use the emergency stop button to halt the engine immediately.
Actions to perform after the engine has been stopped, including leak checks.
Procedures to prevent frost damage to the engine and systems.
Guidelines for engine conservation during extended periods of non-use.
Requirements for the initial warranty service inspection.
Essential checks to perform before the first start of the day.
Specific maintenance tasks required after the first 50 and 100 hours.
Maintenance tasks based on operating hours (250, 500, 1000, 2000) and calendar time.
Maintenance tasks to be performed every 12 and 24 months.
Procedures for general engine inspection and basic checks.
Maintenance tasks for drive belts and air filter replacement.
Oil grade, viscosity, oil level checks, filling, and changing oil/filters.
Coolant types, mixtures, level checks, filling, and draining procedures.
Specific maintenance for engines with external cooling circuits.
Draining, impeller checks, pump servicing, anode inspection, and filter cleaning.
Fuel specifications, bleeding, and filter element replacement.
Maintenance of main switches, connections, fuses, and batteries.
How to check and refill the reverse gear oil level.
Procedure for cleaning the reverse gear oil strainer.
Steps for draining and refilling the reverse gear oil.
Lubrication instructions for the output shaft bearing seal.
Steps for conserving the engine for breaks over two months.
Procedures for preparing the engine after long-term storage.
Specific methods for preserving lubricating and fuel systems for extended periods.
Table of common engine symptoms and their potential causes.
How to view and interpret the engine's event log for diagnostics.
Safe procedure for starting the engine using external batteries.
Key specifications like displacement, speed, temperatures, and weight.
Oil capacity, grades, viscosity, and pressure specifications.
Fuel requirements, injection pump settings, and sulfur content impact.
Freshwater system capacity and related data.
Voltage, amperage, output, and battery capacity details.
Oil capacity, grades, viscosity, and pressure for reverse gears.
To Next Page