12
Instruments and controls
Fire safety
Fire alarm
High engine
compartment
temperature
Fire alarm system
When the spring-loaded switch for the alarm system is acti-
vated, the warning lights for fire, high engine compartment
temperature and the central warning light will come on and
the buzzer will sound. This procedure will check that the fire
alarm system is working.
If any of these warning lights come on while driving:
Stop the bus and break the current using the emergency
cut-off switch (or the battery master switch if there is no
emergency cut-off switch).
At the slightest hint of danger – ensure passenger safety!
Switch for
checking fire
alarm system.
Emergency cut-out (option)
When the emergency cut-out is activated everything electri-
cal is cut off with the exception of the hazard flashers and
communication radio if fitted. On certain models the fuel
supply is also cut off.
Warning!
To Next Page
Loading...
