Hydraulic system
Closed circuit hydraulic load-sensing system,
allowing full independence of the individual
movements.
Equipment
The machine can be provided with different types
of optional equipment, depending on the
requirements of different markets. Examples of
such equipment are attachment quick coupler and
hydraulic breaker.
Modifications
Modifications of this machine, including the use of
unauthorized attachments, accessories, units, or
parts, may affect the machine's integrity (condition)
and/or the machine's ability to function in the way
for which it is designed. Persons or organizations
performing unauthorized modifications assume all
responsibility for consequences that arise due to
modifications or can be attributed to modifications,
including damaging affect to the machine.
No modifications of any kind may be performed on
this product unless each specific modification first
has been approved in writing by Volvo Construction
Equipment. Volvo Construction Equipment
reserves the right to reject all warranty claims that
have arisen due to or can be traced to unauthorized
modifications.
Unauthorised modifications on the upperframe can
have an influence on the ROPS protection system
which is intended to secure the driver in case of an
accident.
Modifications may be considered to be officially
approved, if at least one of the following conditions
has been met:
1 The attachment, the accessory, the unit, or the
part has been manufactured or distributed by
Volvo Construction Equipment and has been
installed according to the factory-approved
method described in a publication available from
Volvo Construction Equipment; or
2 The modification has been approved in writing
by the Engineering Department for the relevant
product line at Volvo Construction Equipment.
Presentation
11
To Next Page
Loading...
