Recommended intervals for critical
parts
To ensure safety at all times when operating or driving the machine, periodic maintenance
must always be carried out. To maintain safety over time, it is also recommended that
periodic check or replacement of the parts given in the table below, is carried out.
These parts are closely connected to safety and fire prevention. The material ages or
materials
are wearing with foreseeable deterioration. If these parts show any abnormality
before the recommended interval has passed, they should be repaired or replaced
immediately. If the hose clamps show any deterioration, such as deformation or cracking,
replace the clamps at the same as the hoses. When replacing the hoses, always replace
the O-rings, gaskets, and other related parts at the same time. The replacements should
be carried out by a qualified service technician.
Inspection interval Item
Daily Fuel / hydraulic hoses - leakage of connections and end fittings
Monthly
Fuel / hydraulic hoses - leakage, damage of connections and end
fittings
Yearly
Fuel / hydraulic hoses - leakage, damage, deformity and aging of
connections and end fittings
Critical parts list for periodic
replacement
Recommended interval
Fuel hoses Every 2 years or 4000 hours, which occurs first
Hydraulic hoses Every 6 years or 6000 hours, which occurs first
Seat belt Every 3 years
176
Maintenance
Maintenance service, when required
To Next Page
Loading...
