By installing OPG 2 top (A) and front (B), cab and
canopy are approved according to OPG Level 2.
Install the necessary protection guards in
accordance with work site conditions and local
government recommendations. Consult your local
Volvo Construction Equipment dealer.
In working conditions where falling or scattering
materials are capable of entering the cab, for
example in mining applications and when operating
with a hammer (hydraulic breaker), protective roof
and window guards should be installed.
If you have a canopy version of the machine, a
hammer (hydraulic breaker) protection kit is also
available. Consult your local Volvo Construction
Equipment dealer for information about when the
different options can be used.
NOTICE
Always, check clearance between bucket and Cab/
OPG guard. Slowly cycle bucket to check for
interference with the Cab/OPG guard. Pay close
attention when quick couplers are used and/or
when buckets have lifting eyes welded.
To Next Page
Loading...
