Service Information
Document Title: Function Group: Information Type: Date:
Description 000 Service Information 2014/5/9 0
Profile:
WLO, L110E [GB]
Description
Wheel loaders L110E and L120E are articulated four-wheel drive machines.
The engine is a six-cylinder, four-stroke, direct-injection, turbocharged diesel engine of the D7D type.
The transmission is hydro-mechanical where all gears are in constant mesh and the designation is HTE204 for L110E and
HTE205 for L120E.
There is a single-stage hydraulic torque converter between engine and transmission.
Front and rear axles have fully floating axle shafts with planetary gears in the hubs. The front axle is equipped with a
differential lock.
The service and parking brakes on the machine are wet type disc brakes.
The service brakes are integrated in the respective wheel hubs and the parking brake is located on the output shaft in the
transmission.
The steering system is hydrostatic with a variable load-sensing axial piston pump and two hydraulic cylinders (steering
cylinders).
Figure 1
To Next Page
Need help?
General
