Volvo SDLG LG936L User Manual

WAR N I N G
Operators and maintenance persons should read this manual
carefully and understand these instructions before use to
avoid serious accident. For the convenience of relevant
people using this manual, it should be easily accessable and
kept in readable condition.
Operation & Maintenance Manual
LG936L
WHEEL LOADE
R
SHANDONG LINGONG CONSTRUCTION MACHINERY CO.，LTD

Volvo SDLG LG936L Specifications

General

Brand	Volvo
Model	SDLG LG936L
Category	Compact Loader
Language	English

Summary

Concise Guide

Feedback

CHAPTER I SAFETY

1 SAFETY LABEL POSITIONS AND THE CONTENTS

Details the location and meaning of safety labels on the machine.

2 SAFETY RULES

Outlines essential safety rules for operators and maintenance personnel.

3 SAFETY OPERATION

Provides guidelines for safe machine operation.

4. STARTING SAFELY

Instructions on how to safely start the machine.

5 SAFETY DRIVING

Guidelines for safe driving practices with the machine.

6 SAFETY OPERATION

Covers safe operational practices and habits.

7 SAFETY PARKING

Procedures and precautions for safely parking the machine.

8 SAFETY EXAMINATION AND REPAIR

Guidelines for safety checks and repair procedures.

CHAPTER II INTRODUCTION

1 GENERAL VIEW OF THE MACHINE & COMPONENTS’ NAME

Identifies key components of the wheel loader.

2 GEOMETRICAL DIMENSIONS

Provides detailed physical dimensions of the machine.

3 PRODUCT TYPE AND ITS MEANING

Explains the nomenclature and meaning of the product code.

4 NAMEPLATE

Details information found on the machine's nameplate.

5 USE CONDITIONS

Describes the intended use and operating environments for the loader.

6 CIRCUMSTANCES REQUIREMENT

Specifies environmental and operational conditions for the machine.

7 FEATURES

Lists the key features and design aspects of the wheel loader.

8 TECHNICAL PERFORMANCE & PARAMETER

Presents detailed technical specifications and performance metrics.

CHAPTER III OPERATION AND APPLICATION

1 BE FAMILIAR WITH MACHINE

Familiarization with machine controls and systems.

2 RUN-IN PERIOD OF NEW MACHINE

Guidelines for the initial run-in period of a new machine.

3 OPERATION AND USE OF LOADER

Detailed procedures for operating the loader.

3.1 Notices for Usage

General notices and guidelines for using the loader.

3.2 Starting

Procedures for starting the machine.

3.3 Running

Instructions for driving and running the loader.

3.4 Stopping

Procedures for safely stopping the machine.

3.5 Operations

General procedures for performing work operations.

3.6 Oil and Fuel Supply

Procedures for supplying engine oil and fuel.

3.7 Long-Time Storage

Guidelines for storing the machine for extended periods.

3.8 General Problems/Possible Cause/Remedies

Troubleshooting guide for common machine problems.

CHAPTER IV MAINTENANCE

1 MAINTENANCE GUIDE

General guidelines and preparations for maintenance.

2. DETAILED RULES OF MAINTENANCE

Detailed procedures for maintenance tasks.

2.3 The Sketch of Lubricating Points

Diagram showing lubrication points on the machine.

2.4 Detailed Rules of Electric System Maintenance

Specific procedures for maintaining the electric system.

2.5 Maintenance Tools

Reference to tools required for maintenance.

2.6 Tightening Torque of Screw

Table of screw tightening torques for key components.

3. CONTENT OF MAINTENANCE

Schedule and tasks for periodic maintenance.

CHAPTER V THE STRUCTURE AND PRICIPLE OF MAIN COMPONENTS AND SYSTEM

1 Transmission System

Details the components and diagram of the transmission system.

2 Hydraulic System

Explains the hydraulic system's composition and operation.

3 Brake System

Describes the driving and parking brake systems.

4 Electric System

Overview of the machine's electrical system components.