Volvo SDLG LG956L - User Manual

WAR N I N G
Operators and maintenance persons should read this manual
carefully and understand these instructions before use to
avoid serious accident. For the convenience of relevant
people using this manual, it should be easily accessable and
kept in readable condition.
Operation & Maintenance Manual
LG956L
WHEEL LOADE
R
SHANDONG LINGONG CONSTRUCTION MACHINERY CO.，LTD

Summary

Chapter I Safety

1 Safety Label Positions and the Contents

Details on safety labels, their placement, and content for user guidance.

2 Safety Rules

General safety rules and precautions for operating and maintaining the machine.

3 Safety Operation

Guidelines for safe machine operation, including familiarization and specific procedures.

4 Starting Safely

Procedures and precautions for safely starting the engine and machine.

5 Safety Driving

Essential safety measures and best practices for driving the wheel loader.

6 Safety Operation

Further guidelines on safe operation, emphasizing good habits and environmental awareness.

7 Safety Parking

Procedures for safely parking the machine, considering various conditions.

8 Safety Examination and Repair

Safety precautions and guidelines for examining and repairing the machine.

Chapter II Introduction

1 General View of the Machine & Components’ Name

Identifies major components and provides a general overview of the machine.

2 Geometrical Dimensions

Provides detailed measurements and dimensions of the wheel loader.

3 Product Type and Its Meaning

Explains the meaning of the product model designation and its components.

4 Nameplate

Describes the information found on the machine's nameplate.

5 Use Conditions

Outlines the recommended operating environments and conditions for the machine.

6 Circumstances Requirement

Specifies the environmental and operational limits for the machine's use.

7 Features

Highlights the key features and design aspects of the LG956L wheel loader.

8 Technical Performance & Parameter

Details the performance specifications and parameters of the machine.

Chapter III Operation and Application

1 Be Familiar with Machine

Understanding machine controls, gauges, and their functions for proper operation.

2 Run-in Period of New Machine

Proper procedures for the initial run-in period to ensure optimal machine performance.

3 Operation and Use of Loader

Detailed instructions for operating the wheel loader, including various work modes.

Chapter IV Maintenance

1 Maintenance Guide

General guidelines and precautions for performing maintenance tasks on the machine.

2 Detailed Rules of Maintenance

Specific rules and procedures for using oils, fuels, coolants, and filters.

3 Content of Maintenance

Outlines the periodic maintenance schedules based on operating hours (10, 50, 250, etc.).

Chapter V System Principle Diagram

1 Transmission System

Explains the principle diagram of the transmission system, including its components.

2 Hydraulic System

Details the pilot control and load sensing hydraulic systems and their components.

3 Brake System

Explains the principle diagrams of the driving, parking, and emergency brake systems.

4 Electric System

Describes the electric system components and their functions, including wiring diagrams.

Volvo SDLG LG956L Specifications