Volvo L70F Service Manual

Fuel consumption
Regarding: L60F, L70F, L90F
The function calculates the machine's fuel consumption and dis‐
plays it on the information panel.
Calculations of consumption are displayed according to the fol‐
lowing:
- Instantaneous consumption in litres per hour.
- Average consumption in litres per hour.
- Total consumption in litres since last reset; up to 99999 litres.
- Residual time for fuel.
Display of consumption and reset of the same takes place in
information figure Vehicle info, Operational Data, see also
Infor‐
mation display, operating display page 42
.
Fuel consumption, total
Input signals Conditions for output functions Output functions
- VCADS Pro parame‐
ter GZC
-Reset
- Instantaneous con‐
sumption
Overall conditions for the function:
- VCADS Pro parameter GZC “ON”
- Vehicle info
Operational Data
Total:
(a)
- Reset Yes
or
- Total fuel consumption > 99999
- Total fuel consumption = 0
a) Shows total fuel consumption since last reset.
The following applies in case of incorrect input signals:
Input
Assumed value in case of error
VCADS Pro parameter GZC “OFF”
Reset No
Fuel consumption, average
Input signals Conditions for output functions Output functions
- VCADS Pro parame‐
ter GZD
-Reset
- Total fuel consump‐
tion
- Machine time
Overall conditions for the function:
- VCADS Pro parameter GZD “ON”
- Total fuel consumption / Machine hours - Vehicle info
Operational Data
Avg.:
(a)
- Reset Yes - Average fuel consumption =
0
a) Shows average fuel consumption since last reset.
The following applies in case of incorrect input signals:
Input
Assumed value in case of error
VCADS Pro parameter GZD “OFF”
Reset No
In case any of the input signals Total fuel consumption or Machine
hours is incorrect, the output signal is incorrect until Reset = Yes
36

Volvo L70F Specifications

General

Brand	Volvo
Model	L70F
Category	Utility Vehicle
Language	English