Need help?Do you have a question about the Volvo A40E and is the answer not in the manual?
General| Brand | Volvo |
|---|---|
| Model | A40E |
| Category | Utility Vehicle |
| Language | English |
Information about the machine's Volvo A35E/A35E FS 6x6 and A40E/A40E FS 6x6 models.
Rules and guidelines for safe machine operation.
Guidelines for operating the machine on public roads.
Essential checks and actions to perform before starting the machine.
Procedures for starting the engine, including preheating and safety checks.
Description of the transmission, gear selector control, and gear-shift inhibitor.
Guidelines for engaging and using differential locks and 6-wheel drive.
Description of the steering system and secondary steering function.
Information on service brakes, parking brake, and engine retarding.
Steps for safely stopping the machine.
Procedures for parking the machine, including long-term parking.
Steps to take when the machine becomes stuck.
Procedures for recovering and towing the machine safely.
Points to observe when dumping, and tipping control functions.
Procedure for manually lowering the dump body in an emergency.
Procedure for emergency lowering of the Full Suspension system.
Procedures for transporting the machine on a truck or trailer.
Information on using lifting tools for lifting the machine.
Techniques for safe and efficient transport operation on roads.
Operating techniques for uphill and downhill slopes.
Procedures and safety for loading the machine.
Considerations for transporting loads, including off-road travel.
Methods and safety precautions for dumping loads.
Preparing the machine for service work in a safe position.
Safety precautions and general advice before performing service.
Measures to prevent personal injuries during service.
Measures to prevent damage to the machine during service.
Specific preparations required before starting service.
Fire prevention measures and actions in case of fire.
Precautions for handling hazardous materials like paint, rubber, and refrigerant.
Interval and conditions for changing engine oil.
Procedure for replacing engine oil filters.
Fuel system maintenance, including bleeding, filters, and water trap.
Procedure for bleeding air from the fuel system.
Replacing primary and secondary fuel filters.
Procedure for filling the fuel tank.
Cleaning or replacing the primary air filter.
Procedure for replacing the secondary air filter.
Cooling system components, coolant, and maintenance procedures.
Procedure for changing coolant, including draining and filling.
Electrical system components, battery, and maintenance.
Power transmission components and maintenance.
Checking and changing transmission oil.
Procedure for checking transmission oil level.
Chart detailing lubrication points and service intervals.
Recommended oils, greases, and coolants for machine components.
Engine oil specifications and change intervals based on fuel sulfur content.
Coolant specifications, mixture ratios, and water quality requirements.
Table of fluid capacities and service intervals.
Intervals for oil and fluid changes for various systems.
Schedule for replacing various filters on the machine.
Engine filter replacement intervals.
Detailed engine specifications.
Air cleaner types and specifications.
Fuel system specifications.
Cooling system specifications.
Electrical system specifications, including bulbs.
Fuses in the electrical distribution box.
Relays in the electrical distribution box.
Detailed specifications for the power transmission system.
Maximum speed ranges for each gear.
Detailed specifications for the brake system.
Compressed-air system specifications.
Specifications for steering and hydraulic systems.
Recommended tyre sizes and air pressures for different loads.
Detailed specifications for the machine's cab.
Information on vibration and sound emissions.
Specifications for machine weights and load capacities.
Dimensional drawings of the A35E/A40E models.
Dimensional drawings of the A35E FS/A40E FS models.
Log for recording service history.
To Next Page
