Von Duprin 33/3527A - User Manual

*911403-00*
911403-00
Devices covered by these instructions:
33/3527A Surface Vertical Rod Exit Device
33/3527A-F (Fire) Surface Vertical Rod Exit Device
CD33/3527A Surface Vertical Rod Exit Device
EL33/3527A Surface Vertical Rod Exit Device
SS33/3527A Surface Vertical Rod Exit Device
Special tools needed:
#10-24 tap
Drill bits: #25, 1/8”, 1/4”,
5/16”, 13/32”
Index:
• Screw chart ............................ 2
• Device installation................ 3-6
• Cut top rod .............................. 7
• Install rod extension................. 7
• Optional equipment ................. 8
• Templates .......................... 9-14
Please give these instructions to building owner after device is installed
Surface Vertical Rod Exit Device
33/3527A
Installation Instructions

Summary

Figure backset and draw device center lines

Tape templates to door and prepare door and frame

Measure to determine length to cut device

Cut device to length

Install tailpiece guide and trim

Install hinge stile mounting bracket

Install top latch and rod

Install top strike

Adjust top rod

Install bottom strike, latch, and rod

Install bottom rod

Adjust bottom rod

Install rod guides

Install covers and end cap

Cut Top Rod Procedure

Install Rod Extension Procedure

Optional Equipment: Cylinder Dogging

Top Template

Bottom Template

Device Template

Von Duprin 33/3527A Specifications