Need help?Do you have a question about the Von Duprin 99 and is the answer not in the manual?
General| Device Type | Exit Device |
|---|---|
| Series | 99 |
| Crossbar Material | Steel |
| Compliance | ADA compliant |
| Mounting | Surface Mounted |
| Door Thickness | 1-3/4 inches |
| Fasteners | Screws |
| Dogging | Optional |
| UL Listing | UL 10C |
| Fire Rating | UL10C Positive Pressure |
| Material | Steel |
General guide for installing the Von Duprin 98/99 Rim Exit Device.
Details screw types, sizes, and applications for various subassemblies during installation.
Steps for aligning strikes, preparing holes, and marking the door for the exit device.
Preparing door holes and mounting the center case for the exit device.
Attaching the center case to the door and installing end caps.
Installing support screws, covering the center case, adjusting the strike, and specific 499F strike installation.
Instructions for installing the Cylinder Dogging option for the exit device.
Instructions for installing the 99-2 Double Cylinder option, including door cutouts and labels.
Provides customer service phone number and website for technical assistance.
To Next Page
