Need help?Do you have a question about the Voodoo Lab PEDAL POWER 2 and is the answer not in the manual?
Eight outputs provide 9V isolated, filtered, regulated DC power for pedals.
Switches 1-8 select output voltage; normal 9V is 'NORMAL' position.
Controls next to outputs 7 & 8 vary voltage from 4-9V.
Details powering Boss pedals requiring ACA adapters using outputs 1-4 and 'ON' switch position.
Powers Line6 pedals using outputs 5 or 6 with 'ON' switch; uses RED cable.
Outputs 7 & 8 allow voltage adjustment from 4V to 9V with 'ON' switch.
Eight outputs provide 9V isolated, filtered, regulated DC power for pedals.
Switches 1-8 select output voltage; normal 9V is 'NORMAL' position.
Controls next to outputs 7 & 8 vary voltage from 4-9V.
Details powering Boss pedals requiring ACA adapters using outputs 1-4 and 'ON' switch position.
Powers Line6 pedals using outputs 5 or 6 with 'ON' switch; uses RED cable.
Outputs 7 & 8 allow voltage adjustment from 4V to 9V with 'ON' switch.
General| Total Outputs | 8 |
|---|---|
| Transformer | Yes |
| Isolation | Fully isolated outputs |
| Input Frequency | 50/60 Hz |
| Output Voltage | 9V DC |
| Output Current | 100mA |
| Dimensions | 6 x 3.4 x 1.75 inches |
| Weight | 2 lbs |
| Input Voltage | 120V AC |
To Next Page
