Need help?Do you have a question about the Voodoo Lab PEDAL POWER 2PLUS and is the answer not in the manual?
General| Output Ports | 8 |
|---|---|
| Output Voltage | 9V, 12V |
| Output Current | 100mA, 250mA |
| Weight | 2 lbs |
| Input Voltage | 120V |
| Input Frequency | 50/60Hz |
| Topology | Isolated |
| Dimensions | 6 x 3.4 x 1.75 inches (152 x 86 x 44 mm) |
| Transformer | Toroidal |
| Cables Included | Yes, various DC power cables |
Lists the items included in the Pedal Power 2 Plus box.
Describes the AC auxiliary outlet and AC power input jack.
Details the power indicator, DC output jacks, SAG controls, and DIP switches.
Advice on securely mounting pedals and the power supply to a board.
Explains connecting DC power cables to pedals and the unit.
Discusses standard and reversed polarity, and connector types for pedals.
Instructions for using DIP switches to select output voltage for pedals.
Guidance for powering Boss, Line 6, TC Electronic, and Eventide pedals.
Explains SAG output feature and the use of voltage/current doubler cables.
Step-by-step guide on connecting the unit and its power cord.
Discusses positive ground effects, reversed polarity, and power requirement determination.
Lists input voltage, output types, current ratings, and physical dimensions.
Details the product warranty, return policy, and contact information.
To Next Page
