VOODOO LAB PEDAL POWER
User’s Manual
Introduction
The Voodoo Lab Pedal Power 2 Plus is the finest power supply
available for guitar effects. It’s eight 9V outputs will power any
type of battery operated effect. Each output is completely isolated,
short-circuit protected, highly filtered and regulated. This insures
reliable operation, free of hum and noise.
Pedal Power 2 Plus includes two high current outputs, capable of
properly powering newer high power effects such as Boss Twin,
Line 6 modelers, and TC Electronic Nova pedals. It also features
two variable voltage outputs to simulate worn batteries. Using an
optional voltage doubler cable, you can power many 18V and 24V
effects as well.
Please take the time to read this entire manual before operating
your Voodoo Lab Pedal Power. This will eliminate the possibility
of damage to your effects from improper usage. You can also visit
our web site at www.voodoolab.com for the latest information on
this and other products.
Important: Pedal Power units purchased in North America should
only be powered from 120VAC. Attempting to use 220-240VAC
mains directly will cause permanent damage to your Pedal Power!
You must use an appropriate stepdown transformer.
To Next Page
Loading...
Need help?
General
