Factory Reset
You can restore the factory default settings and clear any saved presets.
1) Apply power while holding down both buttons #2 and #3. The LEDs will flash
until you release the buttons.
2) LED #1 will be on. Press button #1.
3) Press buttons #2 through #8 as each LED comes on.
4) The LEDs blink three times and then stay off when finished. Remove power.
WARRANTY
North America Only
Voodoo Lab warrants this product against any defects that are due to faulty material
or workmanship for a period of five years from the date of original retail purchase.
This warranty does not include damage to the product resulting from accident or
misuse.
If the product should become defective within the warranty period, Voodoo Lab will
repair it or replace it free of charge, provided it is returned freight prepaid to Voodoo
Lab with a valid RMA (return material authorization) number. Return shipping will be
paid by Voodoo Lab within the U.S. only.
This warranty shall not apply to any goods that have been repaired or altered by
anyone other than the manufacturer. There are no warranties which extend beyond
the terms described herein.
Should you experience any difficulty with this Voodoo Lab product, contact us as
described below. If it is determined that the product must be returned to the factory
for repair, you will be issued an RMA and given shipping and packaging instructions.
Outside North America
Regions outside North America please contact your country’s distributor for warranty
information.
How to Reach Us
Mail: Voodoo Lab
3165 Coffey Lane, Santa Rosa, CA 95403 U.S.A.
Tel: 707 545 0600
Email: info@voodoolab.com
Forum: www.voodoolab.com/forum
To Previous Page
Loading...
Need help?
General
