Voodoo Dragon
2
1. Introduction
This manual is intended for the installation and use of the Voodoo
Dragon. The Voodoo Dragon is based on the 3Dfx Voodoo Graphics
chip set and provides better visuals to games that support the chip set.
The Voodoo Dragon works in conjunction with your current VGA card
by means of a loop cable.
The illustrations in this manual may differ from what appears on your
screen. In the event of any confusion, consult the manual of the
Windows version you are using.
Minimal system requirements:
• Pentium 100 processor
• 16 MB system memory
• Windows 95 or 98 operating system
• 1 MB PCI or AGP VGA card
• Available PCI slot
Conventions in this manual:
<key> Here you press a key. The name of the key will
appear between the brackets.
“System” This is a specific term used in a program; e.g., a term
used in Windows.
[DIR] Text in this font indicates that you are required to type
in text.
Additional information will be shown as follows:
Note: Turn off the computer before opening the casing.
The Voodoo Dragon packaging should contain the following items:
• Voodoo Dragon
• VGA loop cable
• CD-ROM with drivers and applications
• This manual
Contact your dealer if something is missing.
To Next Page
Loading...