18
Troubleshooting
In the event of a problem:
1. Check that the pump is plugged in and there is power.
2. Unplug the pump and check the wet side for damage or obstructions.
3. Reconnect the power and reset the driver (video: ecote.ch/resetdriver).
4. If the pump still does not function properly, use one of these support methods:
• Watch our extensive collection of how-to videos.
These videos are available at ecotechmarine.com/media-gallery/video
If you are still experiencing problems, contact our industry-leading customer service
at service@ecotechmarine.com or 1-800-785-0338, Option 2.
The generation of waves within the aquarium places additional stress on the
aquarium glass and joints. Not all aquariums are designed to withstand this
stress, and failure of the glass and/or joints could result. Before generating
waves, it is recommended that you consult with your aquarium manufacturer
to determine if the tank construction is adequate to withstand the additional
stress. You are also encouraged to assure that your aquarium stand or furniture
is adequately stable to withstand this stress.
EcoTech Marine DISCLAIMS AND WILL NOT BE LIABLE FOR damage to
aquariums or their surroundings, water damage or any other consequential
damages resulting from wave generation. MAKE WAVES AT YOUR OWN RISK.
WAVE MOTION WARNING
To Next Page
Loading...
