Need help?Do you have a question about the Vortech MP10 and is the answer not in the manual?
Access video guides and the online community for troubleshooting and product information.
Lists and illustrates all parts included with the VorTech MP10 Propeller Pump.
Details recommended procedures for cleaning the pump's wet side every 6-8 weeks.
Guidance on selecting the optimal placement for the pump output within the aquarium.
Instructions for cleaning the aquarium glass prior to pump installation.
Procedure for affixing the mounting tab to the desired location on the aquarium.
Instructions for positioning and securing the dry side unit on the aquarium.
Guidance on how to connect the wet side of the pump to the aquarium glass.
Steps to ensure the pump is correctly aligned and operating without excessive noise.
Instructions on how and where to safely mount the EcoSmart driver unit.
Describes the TSM, creating harmonic flow patterns reminiscent of natural conditions.
Details NTM's two-phase program for stirring detritus and promoting nutrient export.
Explains setting pulse frequency and saving custom wave patterns in Short Pulse Mode.
Describes Gyre Mode, setting wave pulse frequency and saving custom wave patterns.
Simulates a high-energy reef environment with crashing waves and surging tide.
Simulates a low-energy lagoon environment with gentle, slow-changing currents.
Provides steps to diagnose and resolve pump and driver issues, including video links.
Advises on potential stress from wave generation and disclaims liability for tank damage.
Details the one-year limited warranty, exclusions, and customer service contact.
Information on RF module, FCC compliance, CE declaration, and country usage restrictions.
General| Power Consumption | 8 - 18 watts |
|---|---|
| Control Type | Wireless |
| Max Glass Thickness | 0.375 inches |
| Voltage | 24V DC |
| Cable Length | 6 feet |
| Warranty | 1 year |
| Flow Rate | 200 to 1, 500 GPH |
| Aquarium Size Range | 2.5 - 50+ gallons |
To Next Page
