Operating Instructions
VOSS.farming impuls duo – DV 40 – DV 80 – DV 120
1. YOUR NEW VOSS.farming impuls duo
2. HOW DOES AN ELECTRIC FENCE WORK?
3. INSTALLATION AND CONNECTION
4. GROUNDING
5. THE IDEAL FENCE
6. INITIAL SETUP
7. MAINTENANCE AND CLEANING
8. SAFETY TIPS
9. DISPOSAL
1 Mains adapter connection
2 Battery connection
3 Control LED (output indicator, battery control)
4 LED bar (fence voltage control)
5 ON / OFF button and power level setting
6 Ground connection (terminal nut, black)
7 Fence connection (terminal nut, red)
1
2
6 7
3
4
5
1. YOUR NEW VOSS.farming impuls
Thank you for choosing the VOSS.farming impuls duo. You have purchased a top-quali-
ty energiser for building a reliable and secure electric fence. Please read these opera-
ting instructions thoroughly before using the VOSS.farming impuls duo. This manual
contains important safety instructions, tips and information.
The VOSS.farming impuls duo can be operated via a 12V battery or via a 230V mains ad-
apter. The energiser constantly checks the voltage on the fence and adjusts the output
automatically. This makes it particularly energy ecient and prolongs the battery life
considerably.
LED lights (3) and (4) on the front of the unit indicate whether the device is in operation,
measure voltage of the fence and also indicate possible faults on the fence.
Mains adapter connection / 12 V battery connection (1 & 2)
Mains adapters and 12V connection cables are connected via sockets on the back of
the device.
Control LED (3)
• Blinking - 12 V battery operation
• Continuous - 230 V mains operation
• LED blue - power output at 100 %
• LED purple – power output at 50 %
• LED red – low battery
When the battery voltage drops below 11.8 V, the energiser emits a beep and starts
operating in energy-saving mode. When the battery voltage drops below 11.6 V, the
energizer switches o automatically. The deep discharge protection keeps the battery
from becoming damaged.
Upper socket - mains adapter
Lower socket - battery connection cable
DE UK FR IT NL SE