27
Function
TV Menu
No Signal Standby
Choose the function menu with arrow buttons, and the press OK button for next operation. Press up
and down buttons to select No Signal Standby and then press left and right buttons to open or close
it. When this option is turn on, no signal automatically stands by for a while.
CEC
Choose the function menu with arrow buttons, and the press OK button for next operation. Press up
and down buttons to select CEC. Press OK button to enter. CEC( Consumer Electronics Control) is
a feature of HDMI designed to allow user to command and control devices connected through HDMI1
/2 by using only one remote control.
Reset
Choose the function menu with arrow buttons, and the press OK button for next operation. Press up
and down buttons to select Reset and then press OK button to enter the next window. Can choose to
confirm or cancel, choose to confirm the television will restart, the menu data will restore the initial
data, choose to cancel also back to the menu interface.
PVR Option
Press up and down buttons to select PVR Option and then press OK button to enter the next window.
Select the disk.
Select 512M / 1G / 2G / 4G.
Select to format the disk.
Select to check the disk.
Select Disk
Time Shift Size
Format Disk
Speed Check
To Next Page
Loading...
Need help?
General
