8
How to assemble the stand
If you need to remove or assemble the stand please read the following instructions.
- Before attaching/detaching the stand, make sure to turn off the TV.
- Before performing work, spread cushioning over the base area to lay the LED TV on.
This will prevent it from being damaged.
Assembling instruction:
Step1: Take out two stands from package,
and insert them into bottom of TV;
Step2: Take out four screws provided with
TV set and tighten them into screw
holes;
- To disconnect the stand from the TV, perform the above steps in reverse order.
Stand and wall-mounting instructions (optional)
To Next Page
Loading...
