EasyManua.ls Logo

Vox av30 - User Manual

Vox av30
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Mains powered apparatus shall not be exposed to dripping or
splashing. No objects lled with liquids, such as vases or drinking
glasses, shall be placed on the apparatus.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
WARNING—This apparatus shall be connected to a mains socket
outlet with a protective earthing connection.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet. (for USA and
Canada)
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
Only use aachments/accessories specied by the manufacturer.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Turning o the power switch does not completely isolate this
product from the power line.
Keep the power plug easily accessible. Do not install this equipment
far from a power outlet and/or power strip.
Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as powersupply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
Do not install this equipment in a conned space, such as a moving
box or other enclosure.
Excessive sound pressure from earphones and headphones can
cause hearing loss.
Use only with the cart, stand, tripod, bracket, or table specied by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
The lightning ash with arrowhead symbol
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s en-
closure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the literature
accompanying the product.
THE FCC REGULATION WARNING
(for USA)
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for
help.
If items such as cables are included with this equipment, you must
use those included items.
Unauthorized changes or modication to this system can void the
user’s authority to operate this equipment.
2015 VOX AMPLIFICATION LTD.
VOX AMPLIFICATION LTD.
1 Harrison Close, Knowlhill, Milton Keynes, MK5 8PA, UK
www.voxamps.com/
Question and Answer IconNeed help?

Do you have a question about the Vox av30 and is the answer not in the manual?

Vox av30 Specifications

General IconGeneral
Power Output30 Watts
Number of Channels1
Number of Tubes0
EffectsChorus, Delay, Reverb
Inputs1 x 1/4" (guitar), 1 x 1/8" (aux)
Outputs1 x 1/4" (headphones)
Amplifier TypeModeling
EQ3-band

Summary

Important Safety Instructions

General Safety Precautions

Essential safety precautions for operating the amplifier, covering water, ventilation, and heat sources.

Electrical Safety Precautions

Precautions regarding electrical shock, earthing, plug types, and power cord handling.

FCC Regulation Warning (USA)

Information for USA users regarding FCC compliance for digital devices and radio frequency energy.

Safety Symbol Explanations

Explanation of symbols indicating dangerous voltage and important instructions within the product's enclosure.

Disposal and Compliance Information

EU Environmental Disposal Notice

Guidelines for environmentally sound disposal of the product, manual, and batteries in the EU.

Declaration of Conformity (USA)

Statement of compliance with FCC Rules for operation in the USA.

Important Consumer Notice

Verification of product suitability for local voltage and country of use to avoid warranty invalidation.

Warranty Policy

Details on warranty period, conditions for paid repairs, and validity of the warranty for the product.

Product Introduction

Key Features Overview

Highlights the analog modeling technology, tube-driven pre-amp and power-amp, and analog voiced digital effects.

Panel Description and Functions

Input and Foot Switch Jacks

Describes the guitar input jack and the connection for optional foot switches (VFS2, VFS5).

Amplifier Sections Control

Details the PREAMP CIRCUIT selector, VOLUME, POWER LEVEL, and CHANNEL selection for amp modeling.

Effects Section Operation

Explains how to use and adjust MOD, DELAY, and REVERB effects, including their output level.

Valve Stage Parameter Adjustment

Covers changing tube parameters for the pre-amp and power-amp, including BRIGHT, FAT, and BIAS settings.

Pre-amp Circuit Models

CLEAN Amp Models

Descriptions of CLEAN1 and CLEAN2 pre-amp models, focusing on tone characteristics.

CRUNCH Amp Models

Descriptions of CRUNCH1 and CRUNCH2 pre-amp models, detailing their tones and influences.

Overdrive Amp Models

Descriptions of OD1 and OD2 pre-amp models, highlighting their classic and 80s hard rock characteristics.

High Gain Amp Models

Descriptions of H.GAIN1 and H.GAIN2 pre-amp models, suited for 90s high gain and modern distortion.

Technical Specifications

Related product manuals