26
4. No sound from the PHONES jack
➢ Could the top panel [MASTER] volume be turned down?
➢ Check whether sound is output from the amp.
To do this you must disconnect the PHONES jack, since sound will not be output
from the internal speaker if headphones or a cable are connected to the PHONES
jack.
If no sound is produced from the amp, check the items listed in “No sound from the
amp,” above.
If there is sound from the amp, check whether your headphones or cable might be
broken or malfunctioning.
5. Effects are not applied
➢ Could the BYPASS LED be lit?
If it is lit, the effect is bypassed. Press the [BYPASS] switch to defeat bypass. The
BYPASS LED will go dark.
➢ Could the [EDIT] knob be set to the minimum value?
Adjust the [EDIT] knob.
To Next Page
Loading...
Need help?
General
