Vox Valvetronix VT30 - Technical Specifications

27
Specifications
Number of amp models: 22
Number of effects
Effect types: 11
Noise reduction: 1
Reverb: 1
Number of programs
Preset: 66
User: 8 (two banks x four channels)
Input/output jacks
Top panel: INPUT jack x 1, PHONES jack x 1
Rear panel: FOOT SW jack x 1
(VT50/VT100 only) EXTERNAL SPEAKER OUT jack x 1
(VT100 only) LOOP SEND jack x1, LOOP RETURN jack x 1
Power amp output
VT15: maximum 15 W RMS @ 4 ohms
VT30: maximum 30 W RMS @ 4 ohms
VT50: maximum 50 W RMS @ 8 ohms
VT100: maximum 100 W RMS @ 8 ohms
Speaker
VT15: VOX original (8 inch 4 ohm) x 1
VT30: VOX original (10 inch 4 ohm) x 1
VT50: VOX original (12 inch 8 ohm) x 1
VT100: VOX original (12 inch 16 ohm) x 2
Signal processing
A/D conversion: 24-bit
D/A conversion: 24-bit
Sampling frequency: 44.1 kHz
Power supply requirements: AC, local voltage
Power consumption
VT15: 28 W
VT30: 40 W
VT50: 57 W
VT100: 115 W
Dimensions (W x D x H)
VT15: 428 x 224 x 395 mm (16.9 x 8.8 x 15.6 inches)
VT30: 456 x 224 x 430 mm (18.0 x 8.8 x 16.9 inches)
VT50: 578 x 265 x 485 mm (22.8 x 10.4 x 19.1 inches)
VT100: 684 x 268 x 553 mm (26.9 x 10.6 x 21.8 inches)
Weight
VT15: 10 kg (22.1 lbs.)
VT30: 12 kg (26.5 lbs.)
VT50: 20 kg (44.1 lbs.)
VT100: 28.5 kg (62.8 lbs.)
Included items: power cable
Options (sold separately): Foot switch (VOX VFS5)
* Specifications and appearance are subject to change without notice for improvement.