Voxx Electronics Prestige APS997Z - Programming Your Remote Control; Remote Transmitter Programming Procedure

18 APS997Z Owners REV.B
1. Cycle the vehicle ignition ON.
2. Press and release the Valet button three (3) times.
3. Press button of each transmitter you wish to program, the LED’s will
ash to conrm each transmitter.
4. Turn the vehicle ignition OFF.
NOTE: This system has one (1) button programming which programs all
channels of the system.
NOTE: The system will hold up to four (4) transmitters in memory,
programming a 5th transmitter will erase the oldest transmitter in memory.
Programming Your Remote Control