Voyager AOM562 User Manual

AOM562
1. POWER
Press this button to turn the AOM562 on or off.
2. SELECT
This control toggles the active display image back and forth between AV1 and AV2.
3. BRIGHTNESS –
Press BRIGHTNESS (–) button to darken the picture.
3. BRIGHTNESS +
Press BRIGHTNESS (+) button to brighten the picture.
Note: he Power button to be pressed off then on
to stay the condition under last memory setting .
For Brightness and Source Select setting change, require t
®
1 2 3 4

Voyager AOM562 Specifications

General

Brand	Voyager
Model	AOM562
Category	Monitor
Language	English

Summary

Voyager AOM562 Control Functions

Power Control

Press the POWER button to turn the AOM562 device on or off.

Display Input Selection

Toggle the active display image between AV1 and AV2 inputs using the SELECT control.

Brightness Adjustment

Use BRIGHTNESS +/- buttons to adjust picture brightness. Settings require power cycle.

Voyager AOM562 Wiring Diagram