VT VT9400 DECT - Call Management; Making Calls, Answering Calls and Ending Calls; Switching between Phone and Headset

15
6. CALL MANAGEMENT
6.1 MAKING CALLS, ANSWERING CALLS AND ENDING CALLS
Phone without headset port Phone with headset port Phone with VT Link, or
Lifter
1. Lift headset from docking cradle, 1. Lift headset from docking cradle, 1. Lift headset from docking
cradle, Make or tap the multi-function
button. or tap the multi-function button. or tap the multi-function button.
2. Lift desk phone handset and set 2. Tap the headset button on the desk 2. Tap the headset button on
the desk
aside . phone. phone.
call 3. Dial number using desk phone. 3. Dial number using desk phone. 3. Dial number using desk
phone.
1. Lift headset from docking cradle, 1. Lift headset from docking cradle, 1. Lift headset from docking
cradle Answer or tap the multi-function button. or tap the multi-function button. or tap the
multi-function button.
2. Lift desk phone handset and set 2. Tap the headset button on the desk
call aside . phone.
1.Pick off the headband of the desk 1.Tap the headset button on the desk Dock the headset, or tap the
multi-
End phone； phone function button call.
call 2.Dock the headset, or tap the multi- 2.Dock the headset, or tap the multi-
function button call. function button call.
6.2 SWITCHING BETWEEN PHONE AND HEADSET
Switch from desk phone to headset
1. Lift headset from docking cradle.
2. Do not return desk phone handset to receiver, as this will hang up the call.
Switch from headset to desk phone（without VT Link or Lifter）
1. Lift desk phone handset.
2. Dock headset, or tap the multi-function button.
Switch from headset to desk phone（without VT Link or Lifter）
1. Lift desk phone handset.
2. Refer to specific desk phone documentation. In some cases a button must be pressed on the desk phone,
while in others the switch from handset to desk phone will be automatic.