47
My telephone doesn’t work at all.
Make sure the power cord is securely plugged in.
Make sure you plug the battery connector securely
into the handset.
Make sure you plug the telephone line cord
Charge the battery in the handset for at least
16 hours. For optimum daily performance, return
the handset to the handset charger when not in use.
Reset the telephone base. Unplug the electrical
power. Remove the handset batteries. Wait for
approximately 15 seconds, then plug the power cord
back in, and re-install the batteries. Allow up to one
minute for the handset and telephone base to reset.
You may need to purchase a new handset battery.
I cannot get a dial tone.
Try all the suggestions above.
Move the handset closer to the telephone base. You
may have moved out of range.
If the previous suggestions do not work, disconnect
connect to a different phone. If there is no dial
tone on that phone either, the problem is in your
wiring or telephone service. Contact your telephone
service provider.
Your line cord may be defective. Try installing a new
line cord.
•
•
•
•
•
•
•
•
•
•
HELP
To Next Page
Loading...
Need help?
General
